Users manual
NR7000
Revision #:
B
Date:
102121
Page #:
8 of 24
www.novuspower.com
VSWR
2.0 Max
DC Input
2.8V - 6V
Noise Figure
<2.0dB
Power Consumption
25mA (typ)
2.2 SAMTEC Connector (10-pin MiniMate)
The NR7000 has a single locking 10 pin SAMTEC MiniMate
0.1” connector (part number IPL1-105-01-L-D-RA-K).
10 pin MiniMate pinout
The reserved pins should not be connected.
There is an optional auxiliary output configuration. This option
provides a programmable LVCMOS output that is an n-divisor
of the internal bus frequency.
Optional Auxiliary LVCMOS output
2.3
PPS (Pin)
The PPS is a one pulse per second, LVCMOS, 3.3V signal into
1KOhm. The pulse width is nominally 100 ms but can be
programmed at the factory or in the field with the serial port
(see Appendix A). The PPS may be advanced/delayed via
serial port commands in 1 ns to compensate for antenna
cabling delays.
+5Vdc
RES
PPS IN
TX
RES
GND
GND
PPS OUT
RX
RES
+5Vdc
RES
PPS IN
TX
AUX OUT
GND
GND
PPS OUT
RX
GND
