NVR
-
6332
-
H8/FR
User
’
s manual (Short) ver.1.2
All rights reserved © AAT Systemy Bezpieczeństwa sp. z o.o.
15
I.
NETWORK SETTINGS
: This menu allows to set up networking. To select desired mode clik
-
on
WORK PATTERN field. MULTIPLE ADDRESS SETTING mode allows to use address Ethernet
Interfaces in separated IP subnets. NETWORK FAULT TOLERANCE uses one of Ethernet interface
as an fault tolerant connection activated after main connection break down. Default IP configuration is
192.168.1.100 netmask 255.255.255.0. It is possible to configure IP address for switch in INTERNAL
ETHERNET PORT SECTION. Please note that IP subnet for the ETHERNET PORT 1 and
INTERNAL ETHERNET PORT were different. In cases where it is necessary to connect NVR to the
Internet (for remote access, email sending, etc.), configure the following parameters: Gateway,
Primary and Secondary DNS. You can also enable DHCP mode which allows you to download an IP
address from a DHCP server (required if running a DHCP server). It is possible to change the default
HTTP port designed to display Web panel of the device and RTSP ports and port server data. After
changing parameter pres NEXT button.
NVR OPERATING
Internal PoE Ports
IP address settings
Internal PoE Ports
IP address settings
Work pattern selction
