Novus NVR-6232-H2 User Manual Download Page 2

NVR

-

6232

-

H2/F

 User

s manual (Short) ver.1.0

 

All rights reserved © AAT Systemy Bezpieczeństwa sp. z o.o.

 

 

2

 

IMPORTANT SAFEGUARDS AND WARNINGS

 

THE PRODUCT MEETS THE REQUIREMENTS CONTAINED IN THE FOLLOWING DIRECTIVES:

 

 

Information

 

The device, as a part of professional CCTV system used for surveillance and control, is not designed for self installation 

in  households  by  individuals  without  technical  knowledge.  The  manufacturer  is  not  responsible  for  defects  and 

damages resulted from improper or inconsistent with user

s manual installation of the device in the system.

 

 
 
 

ATTENTION!

 

PRIOR  TO  UNDERTAKING  ANY  ACTION  THAT  IS  NOT  PROVISIONED  FOR  THE  GIVEN  PRODUCT  IN  ITS  USER

S  MANUAL  AND 

OTHER  DOCUMENTS  DELIVERED  WITH  THE  PRODUCT, OR THAT  ARISES FROM THE NORMAL  APPLICATION OF  THE  PRODUCT, 

ITS MANUFACTURER MUST BE CONTACTED OR THE RESPONSIBILITY OF THE MANUFACTURER FOR THE RESULTS OF SUCH AN 

ACTION SHELL BE EXCLUDED.

 

1.

 

Prior  to undertaking any  action  please  consult  the  following  manual and  read  all  the  safety  and  operating  instructions  before 
starting the device.

 

2.

 

Please keep this manual for the lifespan of the device in case referring to the contents of this manual is necessary;

 

3.

 

All the safety precautions referred to in this manual should be strictly followed, as they have a direct influence on user

s safety 

and durability and reliability of the device;

 

4.

 

All actions conducted by the servicemen and users must be accomplished in accordance with the user

s manual;

 

5.

 

The device should be disconnected from power sources during maintenance procedures;

 

6.

 

Usage of additional devices and components neither provided nor recommended by the producer is forbidden;

 

7.

 

You are not allowed to use the device in high humidity environment (i.e. close to swimming pools, bath tubs, damp basements);

 

8.

 

Mounting the device in places where proper ventilation cannot be provided (e. g. closed lockers etc.) is not recommended since 
it may lead to heat build

-

up and damaging the device itself as a consequence;

 

9.

 

Mounting  the  device  on  unstable  surface  or  using  not  recommended  mounts  is  forbidden.  Improperly  mounted  device  may 
cause  a  fatal  accident  or  may  be  seriously  damaged  itself.  The  device  must  be  mounted  by  qualified  personnel  with  proper 
authorization, in accordance with this user

s manual. 

 

10.

 

 Device should be supplied only from a power sources whose parameters are in accordance with those specified by the producer 
in  the  devices  technical  datasheet.  Therefore,  it  is  forbidden  to  supply  the  devices  from  a  power  sources  with  unknown 
parameters, unstable or not meeting producer

s requirements;

 

11.

 

You  cannot  allow  any  metal  objects  get  inside  the  recorder. It might  cause  serious  damage.  If  a  metal object  gets  inside  the 

device contact the authorised Novus service immediately. 

 

12. The manufacturer does not bear responsibility for damage or loss of data stored on HDDs or other media occurred during the 

usage of the product.

 

Due to the product being constantly enhanced and optimized, certain parameters and functions described in the manual in question 

may change without further notice. 

 

We strongly suggest visiting the www.novuscctv.com website in order to access the newest manual .

 

Technical changes reserved without prior notice and printing errors possible.

 

DIRECTIVE  2014/30/EU  OF  THE  EUROPEAN  PARLIMENT  AND  OF  THE 

COUNCIL  of  26  February  2014 

on the harmonisation of the laws of the Member States 

relating to electromagnetic compatibility (OJ L 96, 29.3.2014, p. 

79

106, 

with changes)

 

DIRECTIVE  2014/35/EU  OF  THE  EUROPEAN  PARLIAMENT  AND  OF  THE 

COUNCIL  of  26  February  2014 

on the harmonization of the laws of the Member States 

relating  to  the  making  available  on  the  market  of  electrical  equipment  designed  for  use 

within certain voltage limits.

 

DIRECTIVE  2012/19/EU  OF  THE  EUROPEAN  PARLIAMENT  AND  OF  THE 

COUNCIL

 

of  4  July  2012 

on waste electrical and electronic equipment (WEEE) (OJ L 

197, 24.7.2012, p. 

38

71,

with changes)

 

DIRECTIVE  2011/65/EU  OF  THE  EUROPEAN  PARLIAMENT  AND  OF  THE 

COUNCIL of 8 June 2011

 on the restriction of the use of certain hazardous substances in 

electrical and electronic equipment (OJ L 174, 1.7.2011, p. 

88

110, 

with changes)

 

Summary of Contents for NVR-6232-H2

























































Reviews: