NVIP-9DN2018V/IR-1P -
User’s manual (short) ver 1.1
All rights reserved © AAT Holding S.A.
19
ELECTRIC CONNECTORS AND RESTORING FACTORY DEFAULTS
7. INSTALLING SD CARD
The microSD card slot is located in the bottom part of the camera housing under the cover:
To install a memory card:
1. Disconnect the power supply of the camera, unscrew two screws securing the cover
2. Remove the cover taking care not to lose or damage the gasket under it
3. Open the card lock by moving it in the direction of the arrow and lifting it
4. Install the memory card as shown below:
5. Close the card lock, press lightly and move in the opposite direction to that shown in point. 3.
Install the cover paying attention to the correct positioning of the gasket.
6. Connect the power of the camera. After starting the camera, the memory card will be
recognized and its status can be checked in the tab "Device
-
> SD card"
