NVIP-4DN3515V/IR-1P - User’s manual (short form) ver 1.0.
All rights reserved © AAT Holding S.A.
19
RESTORING FACTORY DEFAULTS
6.3. Restoring factory defaults by hardware means
In order to restore factory defaults for the camera please follow the instructions:
Unscrew two screws holding camera cover dome using allen key and remove camera cover.
Press the
RESET
button and hold on for 10 seconds
Release button
Mount camera cover dome and screw to camera base.
Log on after approx. 30 seconds using default IP address (http://192.168.1.200) and default user
name (root) and password (pass)
Reset
