NVIP-5VE-4402/F
Quick start guide ver. 1.0
All rights reserved © AAT Holding S.A.
18
ELECTRIC CONNECTORS AND RESTORING FACTORY DEFAULTS
5. ELECTRIC CONNECTORS
5.1. Connecting of the alarm input.
5.1. Connecting of the alarm output.
6. RESTORING FACTORY DEFAULTS
6.1. Software restore to factory defaults
Camera allows to reset your settings to the factory values. To restore the camera settings to the default,
go to the
“Load Default”
tab (Remote Setting
-
> Advanced
-
> Load Default). Then select options and
functions of the camera whose settings are to be reset and press the
“Save”
button.
After about 30 seconds, you can reconnect to the camera (at the current IP address, as long as it was not
reset network settings or on the default IP address).
Note: To make a software restore factory settings, you must be logged in as "root".
6.2 Hardware restore to factory defaults
You can use the RESET button located on the camera cable to reset the camera's settings. To reset the
defaults using the RESET button, press and hold for about 5 seconds.
After about 30 seconds, you will be able to reconnect to the camera at the default IP address.
Information
A description of all functions of the camera is included in the full user manual, posted on the product
page on
www.novuscctv.com/en
Trigger contact
signaling device
Max. load 0.3A
signaling device power
supply
12VDC or 24VAC max.
