NVIP-4DN5002V/IRH-1P User’s manual ver.1.0
(short form)
All rights reserved © AAT Holding S.A.
11
4. To adjust the viewing angle power up the camera. Connect to the camera using a web browser or
you can insert the included BNC test cable into video test cable terminals and connect to a test monitor.
Caution:
Before connecting the camera's power supply, please check the chapter 2.4 and 5.1
Loosen the screws on the sides of the and adjust the ball camera. Do not remove the screws holding the
ball camera. Tighten the screws when finished.
Note: Make sure the camera is pointed in the same direction as the IR LED to ensure a good night
image.
START-UP AND INITIAL CAMERA CONFIGURATION
Video test cable
Loosen screws to adjust the
angle of the camera ball
IR LED
