NVIP
-
3SD
-
8200/30 Quick start guide
ver.1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
10
2.2. Connecting power supply to the camera.
Camera can be supplied using external power supply unit corresponding with the camera parameters.
When selecting the power supply, also take into account the power consumption of the heater.
CAUTION!
In order to provide protection against voltage surges/lightning strikes, usage of appropriate
surge protectors is advised. Any damages resulting from surges are not eligible for service
repairs
.
CAUTION!
It is forbidden to use –
as the camera power source –
PoE equipment (adapters, etc.)
not compatible with IEEE 802.3af standard (items called
“
passive PoE power supply
”).
If use a
PoE technology to power the camera, use a High PoE NV
-
8000PS / HP power injector.
d
Damages that results from the usage of improper power supply source are not covered
by the warranty
.
START
-
UP AND INITIAL CAMERA CONFIGURATION
No
Color
Funkction
Describe
1
brown
Alarm output 1
Two alarm outputs, configurable: NC, NO or pulse
(relay, 12VDC, 2.5A max.)
brown
-
black
Alarm output 1 (COM)
red
Alarm output 2
red
-
black
Alarm output 2 (COM)
orange
Alarm input 1
Seven alarm inputs, configurable: NC or NO
orange
-
black
Alarm input 2
yellow
Alarm input 3
yellow
-
black
Alarm input 4
green
Alarm input 5
green
-
black
Alarm input 6
blue
Alarm input 7
blue
-
black
Alarm input COM
2
red
Audio Output (RCA)
AUDIO OUTPUT:
For connecting external audio devices such as
speakers with an amplifier
3
white
Audio Input (RCA)
AUDIO INPUT:
For connecting external audio devices such as
a microphone with an amplifier
4
-
BNC connector
Analog maintance signal
5
red
Power Supply 24VAC
AC24
-
IN
-
POWER:
Power supply cord AC 24V
black
6
yellow
uziemienie
GNDEARTH:
Ground wire
7
-
Ethernet (RJ
-
45)
Ethernet connector
8
green
RS
-
485 + connector
External keyboard connectors
yellow
RS
-
485
-
connector
