NVIP
-
3DN7030SD/IRH
-
2P User’s manual (short form) ver.1.3
All rights reserved © AAT Holding S.A.
10
2. START
-
UP AND INITIAL IP CAMERA CONFIGURATION
2.1.
Description of connectors and control tools
1. Audio/Alarm I/O & RS
-
485 connector
2. Power connector for 12VDC
3. Gigabit Ethernet connector
4. Power connector for 24VAC
5. BNC connector
6. ’Reset’ button for
2.2. Connecting power supply to the camera
The camera can be supplied using an external power supply with parameters compatible with
camera specification .
CAUTION!
Incorrect connection of power supply wires may result in damage that is not covered by
warranty.
The camera is 24 VAC or 12VDC supplied.
Minimal required power output for the power supply unit should be at least: 60W
In order to provide protection against voltage surges/lightning strikes, usage of appropriate
surge protectors is advised. Any damages resulting from surges are not eligible for service
repairs.
Information: Power supply adapter is not included. Please use power adapter with parameters
specified in user’s manual.
START
-
UP AND INITIAL CAMERA CONFIGURATION
Pin
Symbol
Power description 24 VAC
1
AC1
Power input 24 VAC
2
Ground
3
AC2
Power input 24 VAC
24VAC
Power
Supply
12VDC
Power
Supply
Pin
Power description 12VDC
Inner Pin
+12VDC
Outher Pin
Ground
