NVIP-3DN3012V/IR-1P, NVIP-3DN3013V/IR-1P, NVIP-3DN3014V/IR-1P - User’s manual
(short form) ver 1.0
All rights reserved © AAT Holding sp. z o.o.
19
ELECTRIC CONNECTORS AND ACCESORIES
5. ELECTRIC CONNECTORS AND ACCESORIES
5.1. Connecting power supply to the camera.
Camera can be supplied using external power supply unit corresponding with the camera parameters or
by using RJ45 network socket and PoE (802.3at Type 1 ) power supply unit.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
5.2. Camera control - RS-485
Function unavailable.
5.4 SD card installation
Function available only for NVIP-3DN3014V/IR-1P.
Camera supports microSD/SDHC cards up to a maximum size of 64GB. In order to install the card
properly, please follow the instructions below:
•
Turn the camera off
•
Unscrew screws holding camera dome cover using allen key and remove camera cover.
•
Mount micro SD card in the socket located at the camera’s base, according to the picture:
•
Mount camera cover dome and screw to camera base.
•
Turn the camera on
•
Check the micro SD card by checking its capacity in the “System Config” -> “SD Card”
tab.
microSD card slot
