NVIP
-
2VE
-
4231/WL, NVIP
-
2H
-
4231/WL Quick start guide version 1.1
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
9
2.5. Starting the camera
To start the camera, connect the Ethernet cable to the RJ45 network socket of the IP camera, and the
other end to the network switch. As a power source, it is possible to use an external stabilized power
supply with parameters that meet the requirements of the camera or PoE network switch.
The recommended method of starting and configuring the IP camera is to connect it to a PC or laptop
in a dedicated network switch to which no other devices are connected. In case of power supply from
an external power supply, it is enough to use any network switch or a cable connected directly to the
computer. For network configuration data (IP address, gateway, netmask etc.), please contact the
administrator of the network in which the device is to work.
•
Connection using network switch with PoE support
•
Connection using external power supply and network switch
START
-
UP AND INITIAL CONFIGURATION
PC
IP camera
Power and data transmission
Data transmission
PoE network switch
IP camera
Data transmission
Data transmission
Network switch
PC
