NVIP-4DN7000C-1P User’s manual (short form) ver.1.0
All rights reserved © AAT Holding S.A.
10
NVIP-4DN7000C-1P User’s manual (short form) ver.1.0
2.2.
NVIP-4DN7000C-1P lens mount
Lens Mount:
1. Remove the protecting cap.
2. Remove the sensor protective foil located under the cap
3. Attach the C/CS lens adapter if necessary.
4. Attach the lens to the camera by turning it clockwise.
5. Connect the lens plug to the auto iris connector on the side of the camera. If you are using a lens with
manual iris - skip this step.
6. Adjust the area of view and sharpness of the image using the appropriate controls on the lens.
7. Complete the correction of drive level of the lens iris using the option
SYSTEM -> IRIS
ADJUSTMENT
in the camera menu.
Information:
To mount C type lens you should use additional C/CS adapter (not included)
Warning
Use lens with a C-mount without the appropriate adapter ring may cause damage the camera
and /or lens.
START-UP AND INITIAL CAMERA CONFIGURATION
IP camera
C/CS lens adapter
Lens
