NVIP-2DN5021H/IRH-1P, NVIP-3DN5021H/IRH-1P, NVIP-5DN5021H/IRH-1P
User’s manual (short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
20
7. ELECTRIC CONNECTORS AND ACCESORIES
7.1. Connecting power supply to the camera.
The camera is supplied by using RJ45 network socket. To run NOVUS IP camera you have to connect
ethernet cable between camera and network switch with PoE support. You can also use a PoE power
injector.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
7.2. SD card installation
Camera supports
SD, SDHC, microSD and microSDHC
cards with their capacity up to 64GB. In order
to install the card properly, please follow the instructions below:
Turn the camera off.
Unscrew
the service compartment screw and
open
the service compartment.
Mount
SD, SDHC, microSD or microSDHC
card in the socket located at the camera’s rear,
according to the picture:
Close the service compartment and firmly screw the service compartment screw.
Turn the camera on
Format the card in SDVideo (recommended) or Ext3 file system using a IP camera.
Click
Local Record
->
Record Directory
.
Under
Disk Name
, select
SD1
. Click
Modify
. The Record
Disk Path menu opens.
Uncheck
Enable
.
Under
File System
, select
SDVideo
or
Ext3
.
Click
Format
.
A window will appear to show the status of the formatting. Wait for the formatting to complete
and
then click
OK
.
Check the SD card by checking its capacity in the
Local Record
->
Record Directory
tab
.
ELECTRIC CONNECTORS AND ACCESORIES
