NVIP-2DN5021H/IRH-1P, NVIP-3DN5021H/IRH-1P, NVIP-5DN5021H/IRH-1P
User’s manual (short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
12
4, START-UP AND INITIAL CAMERA CONFIGURATION
4.1. Starting the IP camera
To run NOVUS IP camera you have to connect ethernet cable between camera and network switch
with PoE support.
You can also connect it directly via power supply adapter with parameters compatible with camera
power supply specification.
After connecting power supply initialization process is started, which takes about 2 minutes.
The recommended way to start an IP camera and perform its configuration is connect directly to the
network switch which is not connected to other devices. To obtain further information about network
configuration parameters (IP address, gateway, network mask, etc.) please contact your network
administrator.
Connection utilising network switch with PoE support
Connection utilising external power supply and network switch
START-UP AND INITIAL CAMERA CONFIGURATION
Power supply and
Computer
IP Camera
Network Switch PoE
Network transmission
IP Camera
Network transmission
Network Switch PoE
Computer
Network transmission
