NVIP-2DN5020H/IR-1P, NVIP-3DN5020H/IR-1P, NVIP-5DN5020H/IR-1P
User’s manual (short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
9
1.4. Package contents
After you open the package make sure that the following elements are inside:
IP camera
230 VAC / 12 VDC power supply
Accessories bag
Short version of user’s manual
CD containing manual and software
If any of this elements has been damaged during transport, pack all the elements back into the original
box and contact your supplier for further assistance.
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
2.3. Layout of important camera items
1. RJ45 Network Interface:
(PoE supported).
Information:
Use the included RJ45 coupler to connect to male end of RJ45 Ethernet cable.
2. Audio Input (RCA):
Connect to a self-powered microphone for listen-in audio.
3. Audio Output (RCA):
Connect to an amplifier or self-powered speaker for intercom/2-way audio.
4. DC12V:
12V DC power input.
NOTICE:
Make sure to follow correct polarity (+/-) marked on the power connector when connecting
to power.
SPECIFICATION
Focus
adjustment
Zoom
adjustment
Status
LEDs
Reset button
(reverts to factory defaults)
SD card slot
(max. 64GB supported)
RCA service
analog output
