NVIP-2DN5020H/IR-1P, NVIP-3DN5020H/IR-1P, NVIP-5DN5020H/IR-1P
User’s manual (short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
18
7. ELECTRIC CONNECTORS AND ACCESORIES
7.1. Connecting power supply to the camera.
The camera is supplied by using RJ45 network socket. To run NOVUS IP camera you have to connect
ethernet cable between camera and network switch with PoE support (IEEE 802.3af). You can also use
a power injector compatible with IEEE 802.3af standard.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
Caution:
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
7.2. SD card installation
Camera supports SD, SDHC, microSD and microSDHC cards with their capacity up to 64GB. In order
to install the card properly, please follow the instructions below:
Turn the camera off.
Unscrew the service compartment screw and open the service compartment.
Mount SD, SDHC, microSD or microSDHC card in the socket located at the camera’s rear,
according to the picture:
C l o s e
the service compartment
and firmly screw the service compartment screw.
Turn the camera on
Format the card in SDVideo (recommended) or Ext3 file system using a IP camera.
Click
Local Record ->Record Directory
. Under
Disk Name
, select
SD1
. Click
Modify
. The Record
Disk Path menu opens. Uncheck
Enable
. Under
File System
, select
SDVideo
or
Ext3
. Click
Format
.
A window will appear to show the status of the formatting. Wait for the formatting to complete
and
then click
OK
.
Check the SD card by checking its capacity in the
Local Record ->Record Directory
tab
.
ELECTRIC CONNECTORS AND ACCESORIES
