NVIP-2DN5001D/IR-1P, NVIP-3DN5001D/IR-1P, NVIP-5DN5001D/IR-
1P User’s manual
(short form) ver.1.0
All rights reserved © AAT Holding sp. z o.o.
10
2.3 Zoom and focus adjustment
1. Press down on the tab marked with an arrow to lift up the dome cover slightly. While pressing on
tab, twist the dome cover counter clockwise just a few degrees to release dome cover from back
clips. Lift off the cover.
2. Adjust zoom and focus.
3.
Re-attach the camera cover, until it snaps into place.
Camera module is placed on a mount allowing 3-axis module position adjustment.
WARNING!
Please pay attention to wires connecting camera module with camera body, while you are
adjusting camera module position.
START-UP AND INITIAL CAMERA CONFIGURATION
Zoom
Focus
