NVIP-2DN5000V/IR-1P, NVIP-3DN5000V/IR-1P, NVIP-2DN5020V/IR-1P User’s manual
(short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
12
Camera NVIP-2DN5020V/IR-1P
1. Remove camera base by turning it counter-clockwise.
2. Use the included mounting template or the camera base plate to mark
holes for mounting screws.
3. Mount the camera to the surface using the included mounting screws
(4x).
4. Refit camera into base and adjust position as needed.
5. If you need to adjust the viewing angle, loosen the screws on the sides of
the ball camera and adjust the ball camera.. Tighten the cover when
finished
6. Adjust camera zoom focus. Use service video cable for BNC output.
Adjust the focus zoom with small flat blade.
2.3 Zoom and focus adjustment
Function available only for NVIP-2DN5020V/IR-1P camera.
Adjust the focus zoom with small flat blade. If needed, use service video cable for BNC output.
START-UP AND INITIAL CAMERA CONFIGURATION
Adjust wrench
Focus adjustment
Zoom adjustment
