NVIP-2DN5000D/IR-1P, NVIP-3DN5000D/IR-1P, NVIP-5DN5000D/IR-1P User’s manual
(short form) ver.1.1
All rights reserved © AAT Holding sp. z o.o.
18
Alarm output
Camera alarm output is an relay output type.
Alarm output relay maximum load: 12 VDC / 300mA.
•
Alarm output electric connections
5.4 SD card installation
Camera supports microSD/SDHC cards up to a maximum size of 64GB. SanDisk™ or Kingston™
brand microSD/SDHC cards are recommended. In order to install the card properly, please follow the
instructions below:
•
Turn the camera off
•
Press down on the tab marked with an arrow to lift up the dome cover slightly. While pressing on
tab, twist the dome cover counter clockwise just a few degrees to release dome cover from back
clips. Lift off the cover.
•
Mount SD card in the socket located at the camera’s base, according to the picture:
•
Re-attach the camera cover, until it snaps into place.
•
Turn the camera on
•
Check the SD card by checking its capacity in the
Local Record -> Record Directory
tab
.
ELECTRIC CONNECTORS AND ACCESORIES
microSD card
Alarm
Output (-)
Alarm COM1
(purple)
Alarm
Output (+)
Alarm OUT1
(grey)
Indicator
power
supply
Indicator
IP Camera
http://www.e-camere.ro/camere-supraveghere-ip/Novus/NVIP-3DN5000D-IR-1P
