NVIP-2DN3037V/IR-1P - User’s manual (short form) ver 1.3.
All rights reserved © AAT Holding S.A.
9
2.3. Connecting ethernet cable
To maintain tightness of ethernet cable connection, please follow instruction below:
1. Loosen the nut (a) from the main element (b).
2. Run power cable (without RJ-45 connector) though both elements. Then crimp the cable with RJ-45
connector.
3. Connect the cable to the hermetic connector (c), screw main cover (b), then screw the nut (a).
WARNING! Other camera connectors are not hermetic. User should seal connectors by himself.
2.4. Connecting power supply to the camera.
Camera can be supplied using external power supply unit corresponding with the camera parameters or
by using RJ45 network socket and PoE (802.3at Type 1 ) power supply unit.
Information:
Power supply adapter is not included. Please use power adapter with parameters specified in user’s
manual.
START-UP AND INITIAL IP CAMERA CONFIGURATION
a
b
a
b
c
12 VDC +
12 VDC -
Camera 12 VDC power supply
