NVIP-2DN3037V/IR-1P - User’s manual (short form) ver 1.3.
All rights reserved © AAT Holding S.A.
10
CAUTION:
Do not use power supplies and POE adapters not compatible with IEEE 802.3af standard!
Damage resulting from the use of improper power supply is not covered under warranty!
In order to provide protection against voltage surges/lightning strikes, usage of appropriate surge
protectors is advised. Any damages resulting from surges are not eligible for service repairs.
2.4. Camera mounting
1.
Remove dome cover
2.
Put assembly template of the camera to the desired mounting surface, and mark drilling holes.
3.
Drill mounting and cable holes in previously selected points.
4.
Mount the camera base using included screws on smooth surface
5.
Adjust the position of the camera module.
6.
Put on the camera cover again, and screw it by allen key.
CAUTION!!!
The declared degree of protection of the camera relates to its housing and does not take into
account the possibility of moisture infiltration into the interior of the camera by connecting
cables. Connection cables protection through i.e. sealing up is the responsibility of the camera
installer. The manufacturer is not liable for any damages to the camera caused as a result of
failing in performing that activity by installer, which also means that camera damaged in that
way is not subject to warranty repairs
START-UP AND INITIAL IP CAMERA CONFIGURATION
