NVIP
-
2D
-
6402
-
User
’
s manual (short form) ver 1.0.
All rights reserved © AAT Holding S.A.
9
2.2 Zoom and focus adjustment
1. Remove dome cover by turning it
counterclockwise
2. Adjust zoom and focus.
3. Close camera by turning dome clockwise
2.3. Connecting ethernet cable
To maintain tightness of ethernet cable connection, please follow instruction below:
1. Loosen the nut (a) from the main element (b).
2. Run power cable (without RJ
-
45 connector) though both elements. Then crimp the cable with RJ
-
45
connector.
3. Connect the cable to the hermetic connector (c), screw main cover (b), then screw the nut (a).
START
-
UP AND INITIAL IP CAMERA CONFIGURATION
Zoom
Focus
a
b
a
b
c
