NVIP-2ATM-4401 - User’s manual (short form) ver 1.0
All rights reserved © AAT Holding S.A.
8
START-UP AND INITIAL CAMERA CONFIGURATION
2.3. Starting the IP camera
To run NOVUS IP camera, connect ethernet cable between camera and network switch.
To power it up connect it directly via power supply adapter with parameters compatible with camera
power supply specification, or camera can be powered with PoE (IEEE 802.3af ) compatible switch.
After connecting power supply it takes about 30 seconds to start camera. Then it is possible to connect
to the camera via web browser.
The recommended way to start an IP camera and perform its configuration is a connection directly
to the network switch which is not connected to other devices. To obtain further information about
network configuration parameters (IP address, gateway, network mask, etc.) contact your network
administrator.
Connection using network switch with PoE support
Connection using external power supply and network switch
Computer
IP camera
Power supply and network
transmission
Network transmission
Network PoE switch
Network transmission
Network transmission
Network switch
Computer
IP camera
Power supply
