NVIP-1DN3000H/IR-1P, NVIP-1DN3020H/IR-1P, NVIP-2DN3000H/IR-1P,
NVIP-2DN3020H/IR-1P - User’s manual (short form) ver 1.0.
All rights reserved © AAT Holding sp. z o.o.
8
1.4. Package contents
After you open the package make sure that the following elements are inside:
•
IP camera
•
230 VAC / 12 VDC power supply
•
Accessories bag
•
Short version of user’s manual
•
CD containing manual and software
If any of this elements has been damaged during transport, pack all the elements back into the original
box and contact your supplier for further assistance.
CAUTION!
If the device was brought from a location with lower temperature, please wait until it reaches the
temperature of location it is currently in. Turning the device on immediately after bringing it
from a location with lower ambient temperature is forbidden, as the condensing water vapour
may cause short-circuits and damage the device as a result.
Before starting the device familiarize yourself with the description and the role of particular
inputs, outputs and adjusting elements that the device is equipped with.
2. START-UP AND INITIAL CAMERA CONFIGURATION
2.1 Description of connectors and control tools
1. BNC video output
2. Audio input
3. Power supply 12VDC
4. 100 Mb/s Ethernet port (RJ-45 connector)
2.2 Zoom and focus adjustment
Feature available only for NVIP-1DN3020H/IR-1P and NVIP-2DN3020H/IR-1P cameras.
1. Remover sunshield and front housing.
2. Adjust zoom and focus.
3. Mount front housing and sunshield.
FOREWORD INFORMATION
Front housing
Sunshield
Focus
Zoom
1
2
3
4
