NVE
-
EPV120KP –
Instrukcja instalacji. Installation manual.
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
Wszelkie prawa zastrzeżone.
19
4. Exit button unlocking
-
Pressing exit button will result opening lock relay,
will be confirmed on the display with the image
below:
NOTE!
The default time of unlocking the lock relay is 5 seconds, while the gate relay is 0.2 seconds.
1. Adding monitors
Assigning monitors to panels is described in the monitor manual.
2. Deleting monitors
Deleting monitors to panels is described in the monitor manual.
3. Deleting monitors from entrance panel level
-
Hold[
#
] button for 3 seconds, enter current settings password, it will enter setting mode.
-
Enter [3][#][ROOM NO.][#], it results deleting monitor with set ROOM NO. From entrance panel.
NOTE!
Holding RESET button for more than 5 seconds, will result flashing [*][0][#] buttons and deleting all
monitors assigned to panel.
1.
Please select the most suitable panel position, avoid direct sunshine to camera, dark surroundings, rain.
2.
Determine panel installation height: suggest to be 1.5~1.6meters.
3.
Dig a hole at the suitable height on the wall.
4.
Disassemble bracket from the outdoor panel.
5.
Fix the bracket on the wall with screws and expansion bolts.
6.
Make the cables through the wall & bracket to connect to the panel connector wire.
7.
Put the outdoor panel onto the bracket, and fix it with the screw on the bottom.
7.
Adding / Deleting monitors
8.
Entrance panel installation