NVE
-
EPV120KP –
Instrukcja instalacji. Installation manual.
AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
Wszelkie prawa zastrzeżone.
17
5.
Registering users cards and setting a password.
1. Setting passwords
Default settings password is
0000
.
Default user password is
1234
.
A. Changing settings password
-
Hold [
#
] button for 3 seconds, enter current settings password, it will enter setting mode.
-
Enter [new settings password] example 8888 twice in row, preceding [*] (example *8888#*8888#) to
change settings password
NOTE:
Holding [*] button for 3 seconds will cause exiting setting mode. After 30 seconds of standby panel will
automatictly exit setting mode.
B. Changing user password
-
Hold [
#
] button for 3 seconds, enter current settings password, it will enter setting mode.
-
Enter [new user password] example 6666 two times in row (example 6666#6666#) to change user
password.
2. Adding/Deleting user cards
Up to 100 user cards can be stored in the panel's memory. Easy card management. The operating distance of
the reader is less than 2 cm.
A. Adding user cards
-
Hold [
#
] button for 3 seconds, enter current settings password, it will enter setting mode.
-
Enter [1][#][Room NO.][#].
-
Swipe the user's card for the entered room no. in turn, accepting each of the card will be signaled with a
short sound signal.
-
Press the [*] button to exit the assignment of cards for the entered apartment number. After 30 seconds
of standby, the panel will exit management mode automatically.
-
Repeat the procedure for the next apartment number.
B. Deleting cards of select users
-
Hold [
#
] button for 3 seconds, enter current settings password, it will enter setting mode.
-
Enter [2][#] swipe user card to enter deleting. Swipe cards in order to delete it.
-
After deleting cards press [*] to exit management mode.