NVC-FC2310D, NVC-FC2311D/IR, NVC-FC2312D
- User’s manual ver. 1.1
All rights reserved © AAT Holding Sp. z o.o.
8
4. INSTALLATION
Please familiarize yourself with the device, its parameters and methods of mounting, before mounting .
NVC-FC2310D:
Gently unscrew the dome cover counter-clockwise, twisting it until three latches placed every 120˚ around the
edge are released.
Remove the masking shield from the camera.
Place base of the camera in a desired place and use its mounting holes as a drilling pattern.
Drill holes for screws and cables.
Screw the camera onto desired surface using included screws.
Adjust the position of the camera module.
Put the masking shield onto camera. Please ensure that masking shield does not block the field of view of the
camera.
Screw the camera cover twisting it gently clockwise onto the base. Please ensure that 3 latches match correctly
with the undercuts in the bubble.
NVC-FC2311D/IR:
Unscrew the stopping ring counter-clockwise and remove it simultaneously with the dome cover .
Put video and power cables through a hole in the base of the camera.
Place base of the camera in a desired place and use its mounting holes as a drilling pattern.
Drill holes for screws and cables.
Put video and power cables through a hole in the base of the camera.
Using mounting screws from the package attach the base of camera to the ceiling/wall.
Put dome cover on the camera and gently screw the stopping ring onto the base of the camera.
Manually point the camera in a desired direction to obtain a desired scene view.
Attach the stopping ring tabs to the base of the camera. (holding the camera with hand if needed).
INSTALLATION
NVC-FC2311D/IR
Illumination sensor
IR LED
Horizontal/vertical rotation
NVC-FC2312D
Base of the camera
Dome cover
Stoping ring
Horizontal/vertical
rotation
Base of the camera
Camera cover
Focus adjustment screw
Zoom adjustment screw
Middle-housing
Blocking tab
Additional power supply input
and video output
Joystick
Video output for installators
