All rights reserved © AAT Holding S.A.
7
NVAHD-2DN5101MH/IR-1- ver. 1.0 - User’s manual
3.1. Dimensions:
Dimensions given in millimeters
3.2. View of the camera, layout of the camera items:
4. INSTALLATION
Make sure the location can support 5 times the total weight of the bullet camera. Be careful not to jam
or peel insulation covering of the cable. This may result in malfunction or a fire hazard.
Using the template, mark the position of the mounting holes
Drill holes for the mounting screws and the hole for video and power cables
Pass the power and video cables through the hole in the base of the camera
Pass the cables through a previously prepared hole in the ceiling/wall
Using screws included in the box, attach the base of the camera to the ceiling/wall
Adjust the position of the camera and the lens hood and then lock their position with suitable
screws/nuts
Choose video standard
Make the appropriate camera settings via the OSD menu
NOTE:
By pressing and holding the joystick down (DN) camera switches between PAL and NTSC
systems. The default operating mode of the camera is PAL.
By pressing and holding the joystick Up camera turn off the view. To bring view back, need to
hold joystick up again for 5 seconds.
SPECIFICATION/INSTALLATION
Locking screw
Vertical adjustment
Horizontal adjustment
Rotation adjustment
