NVAHD-2DN5100C-1 version 1.1 - User’s manual
All rights reserved © AAT Holding S.A.
12
SETTINGS
5. SETTINGS
NVAHD-1DN5100C-1 camera feature the OSD menu. During camera standard operation status
information may be displayed on the screen.
As it has been mentioned before, 5 buttons on the rear panel are dedicated to navigation and making
changes:
In order to enter the menu press the joystick down, which results in executing ENTER
command. For choosing the submenus please move the joystick into
UP, DOWN
positions. If
a 8 symbol is present, enter particular sub-menu by pressing the joystick, which is associated with
executing the ENTER
.
command. To change the parameters use the
LEFT
and
RIGHT
joystick
positions
.
In order to leave the menu select
EXIT
and press ENTER. To exit submenu please select
RETURN
position, and press ENTER. Selecting (via left/right joystick movement) END in the
ENTER
position closes the menu and leaves to main camera view.
5.1. Remote navigation by coaxial cable using optional remote controller NV-RCUTC-35HD.
The camera can be navigated remotely by optional controller NV-RCUTC-35HD connected by the
coaxial cable. It allows to control from few hundred meters from the camera (e.g. it could be
connected next to recorder). Menu navigation via remote controller is the same as for buttons
described above.
ENTER
LEFT
DOWN
UP
SET
RIGHT
Buttons to
change remote
control mode
A group of function
buttons to navigate
Pilot status
Connection
cable
Through-connector
