NVAHD-1DN5301H-1 - User’s manual ver. 1.0
All rights reserved © AAT Holding S.A.
7
3.1. Dimensions:
3.2. View of the camera, layout of the camera items:
4. INSTALLATION
Make sure the location can support 5 times the total weight of the bullet camera. Be careful not to jam
or peel insulation covering of the cable. This may result in malfunction or a fire hazard.
Using the template, mark the position of the mounting holes
Drill holes for the mounting screws and the hole for video and power cables
Pass the power and video cables through the hole in the base of the camera
Pass the cables through a previously prepared in the ceiling/wall hole
Using screws included in the box, attach the base of the camera to the ceiling/wall
Adjust the position of the camera and the lens hood and then lock them with position with
suitable screws/nuts.
If necessary, make the appropriate camera settings via the OSD menu
SPECIFICATION/INSTALLATION
Locking screw
Vertical adjustment
Horizontal adjustment
Rotation adjustment
