NV-IR60/150LED
- User’s manual ver. 1.2
All rights reserved © AAT Holding S.A.
4
SAFETY REQUIREMENTS
9. Device should be supplied only from a power sources whose parameters are in accordance with
those specified by the producer in the illuminator technical datasheet. Therefore, it is forbidden to
supply the illuminator from a power sources with unknown parameters, unstable or not meeting
producer’s requirements;
10. Signal cables should be placed in a way excluding the possibility of damaging them by accident.
Special attention must be paid to cables getting from the illuminator and connecting the power
supply;
11. Electric installation supplying the device should be designed to meet the specifications given
by the producer in such a way that overloading is impossible;
12. User cannot repair or upgrade the equipment himself. All maintenance actions and repairs should
be conducted only by qualified service personnel;
13. Unplug the illuminator from the power source immediately and contact the proper maintenance
department when the following occurs:
Damages to the power cord or to the plug itself;
Liquids getting inside the device or exposure to strong mechanical shock;
Device behaves in a way not described in the manual and all adjustments approved by the
manufacturer and possible to apply by user himself, seem not to have any effect;
Illuminator is damaged;
Atypical behaviour of the illuminator components may be seen (heard).
15. In necessity of repairs attention to using only original replacement parts (with their parameters
in accordance with those specified by the producer) should be paid. Non-licensed service and
non-genuine replacement parts may cause fire or electrocution;
Attention!
Technical changes reserved without prior notice and printing errors possible.
