USERS GUIDE
NR2310D-ROG
REVISION
N
DATE
031121
Page #:
39
www.novuspower.com
Channel 1 through 10 output connectors
– BNC or SMA
The ten BNC or SMA connectors 10 MHz sine @ 50 Ohm load.
PPS
– SMA (with GPS locking option)
PPS output: 5V, TTL, short and transient protected. The PPS has a pulse
width of 100µs and an accuracy of 20 ns rms. The PPS is programmable in 1
usec steps
Alert
– BNC-SMA
Connects to the status relay. Contacts rated at 20 VDC/VAC, 0.5 amps.
Contacts are closed during normal operation. Alert status will cause relay to
open. The BNC option eliminates one output port if selected.
Power In
Primary power input. The unit operates from 50 or 60 Hz, 88 to 250 VAC. The
unit does automatic sensing of the input voltage and there are no actions that
need to be taken to operate across the defined AC voltage range. Connector
style IEC 320-C14. The is available with a DC power option that can range
from -60 to +60 VDC in three ranges. The DC supply can be the primary or
secondary back-up to the AC.
