NDR-BA2208-II, NDR-BB2208,NDR-BA2416, NDR-BA4104-II, NDR-BB4104, NDR-BA4208
and NDR-BA4416
User’s manual (short) ver.1.3
All rights reserved © AAT Holding sp. z o.o.
12
2.2.
Electrical connection and other rear panel elements of
NDR-BB2208 DVR
1.
RS-485
:
one RS-485 bus port for connecting external keyboard or PTZ cameras
(RS485: A+, B-)
Note:
Only one of the devices may be connected at a time.
2.
DC12V:
12V DC power socket for connecting included power adaptor.
3. USB:
USB 2.0 port for external Flash memory and mouse connection.
4 LAN:
RJ-45 connector port for connecting to the local network and internet.
5. HDMI MONITOR:
Main monitor connectors, use the HDMI cable to connect to a 1080p 60Hz
(1920x1080) monitor.
6.
VGA:
Main monitor connector, VGA type. Please use signal cable provided with
the monitor when using aforementioned connection type.
7.
VIDEO OUT
:
Main monitor connectors,
8. AUDIO OUT:
Audio out port for connecting local speaker with pre-amplifier.
9.
VIDEO IN:
8 video inputs for connecting video signal sources to the DVR.
10. AUDIO IN:
A
udio (mono) inputs for connecting microphones with pre-amplifiers
11.ALARM IN:
8 alarm inputs, which may be set either as normally open (N.O.) or normally
closed (N.C.). In order to detect the alarm, signal should last for minimum
0.5sec .
12. ALARM OUT :
Alarm relay output, max. load capacity of the outputs is 0,5A/125VAC and
1A/30VDC. (NO, COM)
13.
SPOT OUT
:
SPOT monitor output, allowing to display any camera/sequence of cameras
full screen.
14. POWER SWITCH:
DVR power switch
.
Note:
OSD menu will be displayed on the VGA monitor by default. To switch the OSD display from VGA to
BNC, please press and hold the ESC button for 5sec.
STARTING THE DEVICE
1
2
3
4
5
6
7
8
9
10
11
12
13
14
