NVC-401C, NVDN-401C 1.0 version - User’s manual
All rights reserved © AAT Holding sp. z o.o.
11
Power connector
4.2 Power supply connection
Warning: Device should be supplied only from a power sources whose parameters are
in accordance with those specified by the producer in the camera technical
datasheet. Therefore, it is forbidden to supply the camera from power sources with
their parameters unknown, unstable or not meeting the producer’s requirements.
•
NVC-401C and NVDN-401C are 12VDC ± 10% supplied. Please make sure proper polarity is
maintained.
•
It is possible to use additional power connector, but please make sure proper polarity is main-
tained (in accordance with power connector signs).
5. SETTINGS
NVC-401C and NVDN-401C cameras feature the OSD menu. During camera standard operation
status information may be displayed on the screen.
As it has been mentioned before, 5 buttons on the rear panel are dedicated to navigation and making
changes:
INSTALLATION
ENTER
LEFT
DOWN
UP
SET
RIGHT
Power supply connector 12V DC
