IP 2000 series camera - user manual ver. 1.0.
All rights reserved © AAT Holding S.A.
21
5.4. A group of settings „Alarm”
This menu allows to configure alarm events.
5.4.1. „Motion” Menu
This tab allows to configure options for motion detection.
The camera allows to configure multiple motion detection zones, limit is only their size - they must fit
on the area of the image. To set the area of motion detection, select
Enable
and then mark the desired
part of the image by setting the red rectangle of an appropriate size (this is done by dragging on the
preview window with the mouse with left button pressed). The next step is to set the sensitivity of
motion (option
Sensitivity
), and then set camera response to an event of motion detection, by selecting
Alarm Out
*
and/or
Send Email
. Also an alarm duration can be set (range 5 - 30 s). To change the size
or shape of the area of motion detection, again drag the mouse with left button pressed. This disables
motion detection in the "double" selected area.
Clear
button deleted all previously set motion detection
areas, and
All
button set whole the image as a area of motion detection.
WWW INTERFACE - WORKING WITH CAMERA
*
option active for cameras with alarm input/output
Detection of motion in a set area/areas is indicated by the green letter
M
. When the events of
motion detection are recorded on the SD card, the letter
M
is red.
