www.flexco.com
—18—
D1
D
• Push down on the locating post latch, simultaneously lifting the lower
beam of the Aero Press from the Aero Stand cradle. Avoid pinch points!
• Turn off the electrical power supply to the Aero Press
• Disconnect power and umbilical cables
• Open the vertical column door and use the latch to lock the active
weights in the uppermost position
• If an umbilical cable extension is integrated into the interface, detach the
cable end that is fastened to the upper beam with Velcro
• With the weights locked in the uppermost position, remove detent pins
connecting the lifting interface to the upper beam of the Aero Press
• Unfasten the upper press beam from the lower beam and remove from
the stand
Removing the Aero Press from the Aero Stand
