Novis ProCair Quad User Manual Download Page 26

26

User Guide

 ProCair Quad

This warranty is provided by 

Novis Healthcare 

  (ABN 45 102 735 491)   

of Unit 12, 12 Mars Road, Lane Cove NSW 2066

Novis Healthcare (Novis) products are manufactured 
to the highest quality standards and are thoroughly 
tested and inspected before leaving our factory. In 
addition to any statutory rights and remedies you 
may have, Novis warrants all of its products sold 
directly or via an Authorised Novis Australia Dealer 
against defective workmanship and faulty materials 
from the date of purchase by the end user for a period 
of thirty six (36) months unless otherwise specified 
for that product and its components.
Soft goods 3 years 
Control Unit 3 years

Warranty Claims

To claim under this warranty, please contact Novis 
Healthcare and have your receipt or proof of 
purchase available. Novis Healthcare may need to 
assess the defect before determining any claim, and 
additional information may be requested to process 
your claim. Claims without proof of purchase may not 
be able to be processed.

Novis Healthcare may at its option inspect the goods 
on site or require them to be returned to its premises 
or one of its Authorised Service Agents in person or 
freight prepaid by you.

Novis will undertake at its option, to repair or replace, 
free of charge, each product or part thereof on the 
condition that:

 

The product found on examination, to be suffering 
from a manufacturing defect;

 

The product or relevant part has been serviced 
regularly by Novis or one of its Authorised Service 
Agents and has not been subjected to misuse, 
neglect or been involved in an accident;

 

The repairs are not required as part of normal wear 
and tear

At our option

 

Goods repaired may be replaced by refurbished 
good of the same type rather than being repaired.

 

Refurbished parts may be used to repair goods.

Novis Healthcare will not be held responsible for any 
repair other than those carried out by it or one of its 
Authorised Service Agents.

Warranty repairs do not extend the length of the 
warranty period. 

Limited Liabilities

Our liability under this manufacturer’s warranty is 
subject to us being satisfied that a defect was caused 
by faulty parts, manufacture or workmanship, and 
was not caused or substantially contributed to by 
other factors or circumstances beyond our control, 
including (but not limited to) defective installation, 
maintenance or repair, product modification  
or alteration, any neglect, misuse, or excessive  
use, normal wear and tear or failure to follow 
manufacturer’s instructions. 

IMPORTANT NOTICE FOR 

AUTRALIAN CONSUMERS:

Our goods come with guarantees that cannot be 
excluded under the Australian Consumer Law.  
You are entitled to a replacement or refund for a 
major failure and for compensation for any other 
reasonably foreseeable loss or damage. You are also 
entitled to have the goods repaired or replaced if the 
goods fail to be of acceptable quality and  
the failure does not amount to a major failure. To 
obtain compensation, you will need to provided 
documentary evidence of the loss or damage 
suffered and documentary evidence that such loss or 
damage was a reasonable foreseeable consequence 
of a failure Novis Healthcare to comply with a 
consumer guarantee under the Australian Consumer 
Law. Subject to the provisions of the Australian 
Consumer Law, Novis Healthcare excludes, to the 
fullest extent permitted by law, all liability in respect 
of loss of profit or other economic loss, direct to 
indirect or consequential, special, general or other 
damages or other expenses or costs which may 
include negligence.

Warranty Statement

Summary of Contents for ProCair Quad





























Reviews: