4
Before the First Use
Place the NOVIS ProBlender on a dry and flat surface so that the panel faces forward.
Clean all the removable parts of the NOVIS ProBlender before the first use, and clean the drive unit with a
damp cotton cloth (see Care and Cleaning).
If you place the NOVIS ProBlender near a plug outlet, you may wind the cable in the bottom of the unit to
shorten it.
Connect the NOVIS Blender to the
power supply (AC with 220-240 V,
50/60 Hz) only after setting it up
completely.
Preparing and Using
Preparation and mixing of desired ingredients
1.
Wash and if necessary, cut food in pieces.
2.
Load the container with the pieces.
3.
Add additional liquid if desired or recommended.
4.
Close the lid and place the container correctly on the drive unit.
5.
Select the program or speed level.
6.
Start the appliance using the start/stop button or pulse button.
7.
Wait until the NOVIS ProBlender has completed the selected program or achieved the desired
result with the set speed level.
8.
The speed level can be changed during the food processing, if necessary.
9.
The turbo function is enabled by rotating and holding the speed controller from level 5 to turbo.
10.
If required, the measuring cup can be removed from the lid simply by turning it to left or right.
However, the appliance should be stopped prior to the removal of the measuring cup.
•
The NOVIS ProBlender shuts off automatically at the end of the
selected program. The appliance may be shut off at any time by
pressing the start/stop button or by releasing the pulse button as
well as by turning the program/speed controller back to the « »
position.
•
For processing most food, the speed level 3 or 4 is sufficient.
•
Mixing at levels 4, 5 and turbo might heat the food unnecessarily.
Adding ice cubes is recommended to obtain cool results.
•
For optimal mixing or crushing, you should start the device at speed
level 1 and increase it afterwards. Use the tamper provided to push
food that sticks on the container wall optimally to the blade. Remove
the measuring cup in the cover, and insert the tamper safely in the
container.
•
When using strongly frothing or hot foods the container should be
no more than half filled.
