1. Label sensor (9)
2. Transport shaft (7)
3. Material brake (8)
Check and clean the following parts from dust and adhesive residue.
The two small rolls on the label sensor should turn easily.
Important:
Before starting any cleaning work, disconnect the unit.
Push transport shaft upwards (see illustration below);
both rubber rollers can be turned by rolling them with your fingers.
Move the material brake by pushing its top edge (see illustration below);
return to its initial position after cleaning.
Cleaners
Light benzene and fluff-free, soft cloth.
Do not clean the rollers with sharp objects.
3.
1.
2
M a i n t e n a n c e a n d c a r e
