Novexx Solutions LA-BO Series, Service Manual

Page: 15 / 20

Service manual
LA-BO
07/2017 | 00 11 Repair & Maintenance
REPLACING THE FAN
1. Dismantle the LA-BO from the baseplate by un-
screwing the M6 bolt [2A].
2. Unsrew the 4 M3 bolts [3A] on both sides of the
blow unit.
The unit with the fan is now loose.

Due to the leaf spring it is possible that the
housing of the fan is difficult to remove.
3. Disconnect the power connector of the fan.
4. Unscrew the 4 parkers and replace the fan.

Make sure that the wires of the fan are on top.
5. Connect the power cable. Place the unit back in to
the housing and screw back the M3 bolts (4x).
6. Mount the LA-BO back on the base plate.
7. Turn the ALX/ALS on. The fan of LA-BO should
work again.
[2] Mounting bolt holding the LA-BO.
[3] Bolts holding the blow unit.
[4] Disassembled blow unit - rear side.
[5] Disassembled blow unit - front side.
A
A
A