Novexx Solutions LA-BO Series, Service Manual

Page: 13 / 20

Service manual
LA-BO
07/2017 | 00 9 Repair & Maintenance
PRE-INSTALLATION OF THE
LA-BO ON THE ALX 92X
When the ALX 92x does not have the 3 required mount-
ing holes for the LA-BO, the holes have to be drilled in
the ALX 92x.
1. Remove the back-covers of the ALX.
2. Because holes have to be drilled in the ALX, cover
the inside of de ALX with cloth so that no chips will
be left behind in the ALX that could cause trouble.
3. Drill the holes from the inside of the ALX. Mark the
centres for the 3 holes (see the drawing [1] on the
next page).
4. Drill the holes (Ø 4,1), make sure that all the chips
are removed.
5. Cut the M5 thread (3x).
6. Clean everything.
7. Replace the back-covers. The ALX is now ready to
mount the LA-BO.