Novexx Solutions ALX 92x, Service Manual

Page: 680 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
158
Dispenser feed
64-xx

64-xx: Only 64-xx dispenser version
Applied PIC version on the dispenser rewinder and feed motor output stages.
> OPERATION DATA
Serv. operations
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the num+ber of service operations. The counter is increased by call-
ing the parameter
SERVICE FUNCTION > Service = yes
. Maximum value: 4 billions.
Headnumber
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the number of printhead changes. The counter is increased by calling
the parameter
SERVICE FUNCTION > Cutter exchange = yes
. Maximum value: 4 bil-
lions.
Roll number
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the number of exchanged print rollers. The counter is increased by
calling the parameter
SERVICE FUNCTION > Roller exchange > yes
. Maximum value:
4 billions.
Cutter number
64-xx AP 5.4 AP 5.6

Only with mounted and activated cutter.
Shows the number of exchanged cutters. The counter is increased by calling
the parameter
SERVICE FUNCTION > Cutter exchange =yes
. Maximum value:
4 billions.
Head run length
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6
Shows the total "covered distance" of the printhead. The counter is reset with
each calling of the parameter
SERVICE FUNCTION > Cutter exchange = yes
. Maximum
value: 4 billions.