Novexx Solutions ALX 92x, Service Manual

Page: 660 / 824

05/16 Rev. 03 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP 5.4 Gen II – AP 5.6 AP 4.4 – AP 5.4 64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
138
SPECIAL FUNCTION
Printer type
64-xx ALX 92x DPM PEM ALX 73x (PMA) AP 4.4 AP 5.4 AP 5.6

Only in production mode.
Selection of the machine type. Must be set after the CPU board was replaced
or after new firmware was loaded.
The „x“ in the machine name stands for the
printhead width. It is detected and replaced automatically.
64-0x
64-04/05/06/08 desktop printer.
DPM-0x LH
Printing and dispensing module DPM, lefthand machine.
DPM-0x RH
Printing and dispensing module DPM, righthand machine.
ALX 92x LH Printing and dispensing machine ALX 924/925/926, lefthand version.
ALX 92x RH Printing and dispensing machine ALX 924/925/926, righthand version.
MICROJET 64-0x
MICROJET 64-0xX
MICROJET 64-0xXX
PEM-0x LH Print engine module PEM, lefthand machine.
PEM-0x RH Print engine module PEM, righthand machine.
AP5
AP 4.4, AP 5.4 AP 5.6
AP7
AP 7.t
Printhead type
64-xx ALX 92x DPM PEM ALX 73x (PMA)

This parameter is only visible in production mode!
This parameter chooses the applied printhead type. In most cases equals
the printhead width the maximum printwidth of the printer. This parameter is
called automatically, after you have modified the printer type setting
(
SPECIAL FUNCTION > Printer type
).
KCE 8Inch
Printhead Kyocera KCE, 8" width, is applied in the following printer type:
64-08
KCE 6Inch Printhead Kyocera KCE, 6" width, is applied in the following printer types:
64-06, DPM 6“, PEM 6“, ALX 926
KCE 5Inch
Printhead Kyocera KCE, 5" width, is applied in the following printer types:
64-05, DPM 5“, PEM 5“, ALX 925, PM 3000
CAUTION!
Selecting an inappropriate machine type can lead to malfunctions or
damage of the printer.

Select the printer type that is named on the printers rating plate.