7
Noventri Eco-Series User Guide
SF-100E-0160-01 REV 03
4. Installation
4.1
Connect the monitor to a Surge Suppressor outlet using the AC power cord that came
with the monitor.
4.2
Connect the SF-100e to the monitor using a
DVI-I
cable. When connecting to a monitor
with a VGA connection you will need a DVI to VGA adapter. When connecting to a
monitor with HDMI connection you will need a DVI to HDMI cable. These adapters are
available to purchase from Noventri.
4.3
If you plan on using your SF-100e as a networked player, connect the SF-100e using
an
Ethernet
cable to your local network.
4.3.1
If you are installing multiple SF-100e players to your network and they come up
with the default IP Address 192.168.0.190, you must connect only one player to
the network at a time and change its IP Address to another one before connect-
ing the next SF-100e player. (See the
Network Usage
section of this manual)
4.4
If you plan on using your SF-100e as a stand-alone (Sneakernet) player, the
Ethernet
cable is not required.
4.5
If you will be using your SF-100e as a networked player, insert the USB Drive into the
SF-100e USB port. If you will be using your SF-100e as a stand-alone (Sneakernet)
player, the USB Drive will be inserted once a project has been made and published to
it. The USB Drive must remain in the SF-100e for the player to work properly.
