11
Noventri Eco-Series User Guide
SF-100E-0160-01 REV 03
•
Enter the IP Address or Hostname of the computer where the
Noventri
Server™
software is installed and the Port number separated by a colon.
Example:
192.168.0.200:20940
•
The computer that has
Noventri Server™
installed must have a STATIC
IP Address (not DHCP) for the SF-100e
to be able to access it consis-
tently. If necessary, have your network administrator set up a STATIC IP
Address for you.
Note:
If you reset your SF-100e back to its Factory Defaults the
NOVENTRI SERVER will not be changed. (see
Factory Defaults
section of this Manual)
5.8.8 MAC ADDRESS
– The MAC Address is shown for reference only and cannot
be changed. The manufacturers assign a unique address to every network
adapter.
5.8.9 SERIAL NUMBER
– The serial number is shown for reference only and cannot
be changed. This lets us identify each SF-100e, when it was built, and which
batch it came from.
5.8.10 NEW PASSWORD
– If you would like to change the default password of the
SF-100e, enter the New Password here.
Note:
If you are unable to log in to your SF-100e, you can reset it back to
the default. (See
Factory Defaults
section of this Manual)
5.8.11 RE-ENTER PASSWORD
– If you entered a New Password, enter it again here
for verification. Click the
SUBMIT
button to apply the changes.
5.8.12 SUBMIT
– Once you are done making changes, you will need to save them.
Click the
SUBMIT
to apply the changes. (This will take a moment.)
5.8.13 CANCEL
– To exit without saving any of the changes you made, click CANCEL
to be returned to the login page.
5.8.14 DEFAULTS
– To restore the default settings for the SF-100e, click the
DEFAULTS button. (see
Factory Defaults
section of this Manual)
5.8.15
REBOOT
– To reboot the SF-100e, click the
REBOOT
button. This will take
about 2 minutes to boot back up. The Configuration screen will start counting
down 120 seconds and will return to the login page when done.
