Novell ZENWORKS LINUX MANAGEMENT 7.2 IR2 - 07-20-2009, Installation Manual

Page: 100 / 134

100 Novell ZENworks 7.2 Linux Management Installation Guide
no
vd
ocx
(e
n)
13
Ma
y 20
09
3 Specify a name for the catalog, then click Next to display the Catalog Attributes page.
4 Click Next to display the Summary page.
5 On the Summary page, click Next .
6 Click Add to display the Select Bundles dialog box.
7 Navigate to and click the desired upgrade bundle to move it to the Selected list, then click OK .
8 Click Next to display the Catalog Assignments page.
9 Click Add , navigate to and click the desired devices to move them to the Selected list, then click
OK to display the Bundles Options page.
10
Click Next to display the Finish page, review the information, then click Finish .
11 Depending on your needs, continue with “Upgrading Managed Devices Other Than SLES 10
and SLED 10 by Using an Upgrade Bundle” on page 100 or “Upgrading SLES 10 or SLED 10
Managed Devices by Using an Upgrade Bundle” on page 101 .
Upgrading Managed Devices Other Than SLES 10 and SLED 10 by Using an Upgrade
Bundle
1 Click the Policies tab.
2 Click New , then click Policy to display the Policy Type page.
3 Select Remote Execute Policy , then click Next to display the Policy Name page.
4 Specify a name for the policy, then click Next to display the Remote Execute Policy page.
5 From the Script to run drop-down list, choose Define your own script .
6 Paste the contents of the
policy.sh
script file into the Script content box. You can access the
script file from the mount point
/data
directory.
The Policy script performs the following tasks:
Š Subscribes to the catalog containing the upgrade bundle.
Š
Installs the upgrade bundle on the managed device.
7
Edit the script so that
catalog_name
is the catalog you created in “Creating Catalogs for
Upgrade Bundles” on page 99 and
bundle
is the bundle that you specified while creating the
catalog ( Step 7 on page 100 ).
8
Click Next to display the Summary page, then click Next to display the Policy Assignments
page.
9 Click Add to display the Select Assignments dialog box, browse to and select the devices to
which you want to assign the Remote Execute policy, then click OK .
10 Click Next to display the Policy Schedule page.
11 In the Schedule Type drop-down list, select Date Specific , specify a start date and time to apply
the policy, then click Next to display the Policy Groups page.
NOTE: If you want to verify the upgrade immediately, set the start date to today and the start
time to 12 a.m. The Remote Execute policy is executed at the next scheduled refresh for the
devices. Alternately, you can manually refresh the devices.
12 Click Next to display the Finish page, then click Finish .