background image

198

ZENworks 10 Asset Management Reference

no

vd

ocx 

(e

n)

  

7 Ja
nua
ry 201

0

33.1.2  Purchases Reports

33.1.3  Software Compliance Reports

Current Allocations

For each licensed product, shows the total number of licenses and 
how many are allocated and unallocated.

Demographic Over-Allocation

Lists all licensed products whose number of demographically 
allocated licenses is more than the number of installations 
associated with the demographic.

Demographic Under-Allocation

Lists all licensed products whose number of demographically 
allocated licenses is less than the number of installations associated 
with the demographic.

Device Over-Allocation

Lists all licensed products whose number of device-allocated 
licenses is less than the number of installations associated with 
devices.

Duplicate Allocations

Lists all licensed products with device allocations that duplicate 
demographic allocations.

Installations with no Allocations

Lists all licensed products with installed licenses that are not 
covered by demographic or device allocations.

Report Title

Description

Purchase Record Detail

Lists all purchase records and includes complete details such as PO 
number, reseller, manufacturer, and price.

Purchase Record Summary

Compiles the purchase records by catalog product. For each 
catalog product, lists the product type, purchase quantity, average 
unit price, and total price. 

Report Title

Description

Software Compliance by Cost 
Center

Groups licensed products by cost center and shows if a licensed 
product is overlicensed (more licenses than installations) or 
underlicensed (more installations than licenses). 

Software Compliance by 
Department

Groups licensed products by department and shows if a licensed 
product is overlicensed (more licenses than installations) or 
underlicensed (more installations than licenses). 

Software Compliance by Site

Groups licensed products by site and shows if a licensed product is 
overlicensed (more licenses than installations) or underlicensed 
(more installations than licenses). 

Report Title

Description

Summary of Contents for ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3 30-03-2010









































































































































































































Reviews: