Novell XDASV2 - ADMINISTRATION GUIDE V1, Administration Manual

Page: 12 / 40

12 Novell XDASv2 Administration Guide
n
ov
do
cx (e
n)
16
Ap
ril 20
10
# Minimum log-level allowed in syslog.
#log4j.appender.S.Threshold=INFO
# Defines the type of facility.
#log4j.appender.S.Facility=USER
# Layout definition for appender Syslog S.
#log4j.appender.S.layout=org.apache.log4j.PatternLayout
#log4j.appender.S.layout.ConversionPattern=%c : %p%m%n
# Defines appender R to be a Rolling File Appender.
#log4j.appender.R=org.apache.log4j.RollingFileAppender
# Log file for appender R.
#log4j.appender.R.File=/var/opt/novell/eDirectory/log/xdas-events.log
# Max size of log file for appender R.
#log4j.appender.R.MaxFileSize=100MB
# Set the maximum number of backup files to keep for appender R.
# Max can be 13. If set to zero, then there will be no backup files.
#log4j.appender.R.MaxBackupIndex=10
# Layout definition for appender Rolling log file R.
#log4j.appender.R.layout=org.apache.log4j.PatternLayout
#log4j.appender.R.layout.ConversionPattern=%d{MMM dd HH:mm:ss} %c : %p%m%n
Table 2-1
XDASv2 Property File
2.3 Configuring XDAS Events
See Chapter 3, “iManager Plug-In for XDASv2,” on page 13 for information on configuring
XDASv2 events for eDirectory.
2.4 Loading the Modules
After you have configured the XDASv2 events, run the following command to load the XDASv2
modules:
Š
Linux/Solaris: Run the following command to load the XDASv2 modules:
ndstrace -c "load xdasauditds"
Š
Windows: Run
ndscons.exe
, select xdasauditds option from the list of available modules,
then click Start .
If you have installed NMAS and enabled NMAS auditing, the NMAS server automatically loads the
XDASv2 library.
Options ID Description
Syslog Appender S
Rolling File Appender R