Novell SUSE Linux Enterprise Server, Manual, Page: 72 / 98

After the installation program is completed, the virtual machine should run
SLE 10 SP1 and be registered with xend.
16 Log in to the SLE 10 SP1 virtual machine.
17
If you want the SLE 10 SP1 virtual machine to run in GUI mode, complete
the following from its command line:
17a
Enter
init 3
.
17b Enter
sax2
to configure the GUI environment.
17c
Enter
init 5
to restart the GUI.
18 Open the virtual machine’s
/etc/inittab
file with a text editor.
19
Find the section titled
# getty-programs for the normal runlevels
20
After the line that begins with
1:2345:respan:sbin/mingetty
, add
the following lines:
2:2345:respawn:/sbin/mingetty tty2
3:2345:respawn:/sbin/mingetty tty3
4:2345:respawn:/sbin/mingetty tty4
5:2345:respawn:/sbin/mingetty tty5
6:2345:respawn:/sbin/mingetty tty6
21 Save the file and restart the virtual machine’s operating system.
If the mouse pointer stops working within the virtual machine, you might need to restart
the GUI on the virtual machine host by entering
init 3
then
init 5
on the host’s
command line.
After completing these instructions, the updated SLE 10 SP1 virtual machine should
perform correctly. Configuration changes should be made using Virtual Machine
Manager or by modifying xend settings.
66 Virtualization with Xen