Novell Server Consolidation and Migration Toolkit 1.1, Administration Manual, Page: 98 / 126

98 Novell Server Consolidation and Migration Toolkit Administration Guide
no
vd
ocx
(E
NU)
9 Decem
ber
200
5
11.3 Verify Your Migration Project
After you have modeled your migration by dragging-and-dropping data in the Project Window, you
must verify your project to check for problems that might hinder a successful migration.
NOTE: Remember, dragged-and-dropped items appearing in the eDirectory tree are merely
assigned to be copied to that area in the eDirectory tree. Objects are not migrated until you actually
begin the migration.
To perform the verification:
1
On the Migration Wizard toolbar, click Project > Verify and Migrate Project , or click the Verify
and Migrate button.
2 (Conditional) If the Verification Wizard finds any problems (such as insufficient rights, name
spaces that are not loaded, disk space limitation, and improper TSAs), you must resolve these
problems and rerun the Verification Wizard before proceeding.
Continue with the next section, Migration Step 1: Copy File System Data .
11.4 Migration Step 1: Copy File System Data
During the Copy File System Data step, the dropped directories are copied to the destination server
and created directories are added to the destination server.
1 In the Project View dialog box, click Copy File System Data .
2 In the Dropped Folders dialog box, verify the accuracy of the source and destination paths for
all of your dropped folders and then click
Next .
3 (Conditional) If you created new folders as part of your migration project, verify the source and
destination paths in the Created Folders dialog box and then click
Next .
4 In the Duplicate Files dialog box, indicate how you want to handle any duplicate filenames
between the source and the destination by selecting one of the following and then click
Next :
• Don’t Copy Over Existing Files: The file on the source server is not copied and the file
with the same name on the destination server is not replaced.
• Copy the Source File If It Is Newer (Default): If the file on the source server is newer
than the one on the destination server, the file on the destination server is replaced.
• Always Copy the Source File: The file on the source server always replaces the file with
the same name on the destination server.
5 In the Disable Login dialog box, indicate whether you want users to be logged in during the
data migration by selecting one of the following and then click
Next .
• Copy Volumes with Users Logged In (Default): Migration Wizard does not copy open
files. Select this option if you want to copy nonaccessed files while users are logged in.
• Disable Login: If you disable user login, you can be sure that no other users can log in to
the network and open files during the file copy.
If you want to delete all user connections prior to performing the migration, click
Broadcast Logout Message to warn users to log out. If any user connections remain, you
must manually disconnect them from the source server console.